Scroll To Top

Specialty Adhesive: Megasorber A200

High-Tack and High-Temperature Resistant Adhesive


High-Tack, High-Temperature Resistant AdhesiveMegasorber A200 is a high-tack and high-temperature resistant adhesive utilizing the latest polymer-alloy technology. It is a one-component moisture-cured adhesive.

Megasorber A200 adhesive is free of solvent, isocyanate, PVC and silicones. It is natural, odourless and fast curing. It has 0% VOC.

Megasorber A200 adhesive has a temperature resistance up to 200°C (short-term exposed for 10 minutes) once cured. It forms extremely strong bond once fully cured and mechanical method has to be used in order to remove it.

This adhesive has very good UV-resistance and aging resistance.

Available in cartridges or sausages.

adhesive sausage

Applying adhesive
Applying adhesive to acoustic panel
Adhesive applied
Adhesive applied to panel
Installing acoustic panel with adhesive
Installing acoustic panel
Adhesive initial grab
Adhesive has high initial grab but panel can be re-positioned for up to a few minutes

Acoustic Panels Installation:
See how easily Megasorber P25 and P100 acoustic panels are installed with our A200 adhesive directly onto a concrete soffit

Key Features

A special V-groove nozzle designed for simple and easy application
V-Groove Nozzle

  • High tack and high bonding strength
  • Free of solvent, isocyanate, PVC and silicones
  • One component, moisture cured formulation
  • Odourless and fast curing
  • High-temperature resistance up to 200°C (short-term exposure only)
  • Completely weather resistant
  • Paintable
  • Ease of application: can be easily extruded with hand, air or battery gun

Key Benefits

  • High initial grab
  • Allows re-positioning for up to a few minutes
  • High bonding strength
  • No odour or solvent
  • Long service life
  • Clean to handle and easy to apply


Megasorber A200 adhesive is designed for bonding Megasorber acoustic materials, such as Megasorber P range, Megasorber FG range, Megasorber C50 and C25, Megasorber B range, Megasorber RB range and others.

This adhesive also provides excellent bonding of most common materials, such as foam, polyester, aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder coated metal, glass, acrylic glass, ceramics, stone, concrete, ABS, PBT, PVC hard and soft, PPE, EPDM, wood, powder-coated, vanished, galvanized, chromalized and pot-galvanized surfaces.

Tech Specs

Product codes

Standard Product Colour Type Size Pack Size
Megasorber A200WC White Cartridge 290ml 12 cartridges per carton
Megasorber A200GS Grey Sausage 600ml 12 sausages per carton


Standard colour: white or grey
Density: 1.51g/cm3
Consistency: Thixotropic
Assembly time: within 7 minutes @ 23°C 50% R.H.
Curing speed: approx. 4mm @ 23°C 50% R.H after 24 hours
Operation temperature: -40°C to +120°C;
Intermittent temperature: +200°C for 10 minutes and +180°C for 30 minutes.

Chemical Resistance

  • Completely weather resistant
  • Good: against water, aliphatic solvents, oils, fat, watered inorganic acids and alkalis
  • Moderate: against esters, ketone and aromatics
  • Not resistant: against concentrated acids and chlorinated hydrocarbons

Storage & Shelf Life

Store in a cool, dry place, out of direct sunlight. Storage areas must be well ventilated and comply with Local, State and Federal regulations. For maximum shelf life, store between 5°C and 20°C. Shelf life is up to 18 months when stored in original, unopened containers, under the above conditions.

Health & Safety

  • Non-hazardous
  • Not dangerous goods

Important notice and disclaimer

Specifications are subject to change without notice. Please contact us for the latest version. Our data is based on experience in the laboratory and in practice. The user is recommended doing their own tests for intended application under practical conditions. Due to different materials, application methods and local given facts on which we do not have influence, we cannot give any warranty. We recommend that users carry out their own tests to confirm the suitability of the product for their particular application.

Installation Instructions

Surface Preparation

The surface has to be clean and free of dust, oil and grease. Clean surface with Megasorber AC5 Adhesive Cleaner, acetone or isopropanol (IPA).

Application Instructions

The information below is a typical guidance only for installing Megasorber acoustic panels with A200.  These recommendations are for general guidance only. Installation methods must be tested under actual service conditions to determine their suitability for a particular purpose

  • We recommend wearing gloves during handling and installation of Megasorber acoustic panels.
  • Install on clean and dry surfaces only. Clean surface with Megasorber AC5 or equivalent.
  • Apply A200 adhesive onto the reverse side of the acoustic panel.   Important note: Megasorber acoustic panels have a Soundmesh G8 facing (a woven non-combustible fabric).  The glue must be applied onto the opposite site of the fabric facing.  
  • Install panel immediately after the application of the glue.  Important note: A200 is a fast curing adhesive.  The A200 adhesive starts to skin and lose tack after 7 minutes of application. 
  • Align panel and apply gentle pressure to the panel. Megasorber A200 holds the panels in position instantly.
  • Adjust and re-position panels as needed.  Megasorber A200 allows up to 7 minutes for alignment after the application of the glue.
  • Once the panel is in place, apply firm and distributed pressure to the panel to ensure it is level and even. DO NOT use a pressure roller to compress the panel.
  • For architectural applications:  leave a 15mm to 30mm gap between panels.  Do not butt-join panels.
  • Clean any excess A200 adhesive with Megasorber AC5.
  • Allow 24 hours for adhesive to cure completely.

Please refer to a copy of the installation guide for more details - Installation Guide_A200.pdf

Application Guns

A battery power sausage gun is recommended. The product can also be applied with a manual application gun.

Battery powered application gun
battery powered adhesive gun
Manual application gun
Manual adhesive gun


  • Cleaning uncured sealant immediately with grain paper / sand paper, Megasorber AC5 Adhesive Cleaner, acetone or isopropanol (IPA).
  • Cleaning of cured sealant: remove by a mechanical method.