cost-effective solutions to noise and vibration control
Megasorber F
Acoustic Foam with Film Facing and
Optional Self-adhesive Backing
Features
Megasorber F is a film faced, partially reticulated acoustic foam capable of operating
continuously at -20°C to 120°C and intermittently to 140°C. The facing is applied
by a special process which maximises the sound absorption.
Using the latest hydrolysis resistant acoustic foam, Megasorber F acoustic foam have exceptional sound absorption capacity and high durability in hot and humid conditions (long service life) over convectional PU foams.
Megasorber F can be with or without self-adhesive backing. For the product with self-adhesive backing, mechanical adhesion between the foam and the substrate is maintained at 120°C, with no loss of adhesion at intermittent 140°C (284°F).
Key Features
- Optimised sound absorption utilising micro-porous or quarter wavelength design
- Hydrolysis resistant
- Ignition retardant
- Environmentally friendly
- Ease of application
Key Benefits
- Reduces air-borne noise very effectively
- Product will not rot or powderize in hot and humid conditions
- Low installation costs
- Long service life
- Clean to handle and easy to cut
- Resists liquids, dusts and sprays
Applications
- Acoustic lining for compressors and generator set enclosures
- Soundproofing lining of enclosures for machinery, equipment, electronic and electrical equipment
- Under bonnet insulators and interiors sound absorption for buses, trucks, cars, trains
- Wall and ceiling linings for plant and equipment rooms
- Ventilation or airduct lining
Tech Specs
Typical Sound Absorption Coefficient of
Megasorber F Black Flim Facing Range
Standard Product Range
| Standard Product | Thickness | Width | Roll Size |
|---|---|---|---|
| Megasorber F12BKA* | 12mm | 1400mm | 1.4m x 60m |
| Megasorber F25BKA* | 25mm | 1400mm | 1.4m x 30m |
| Megasorber F50BKA* | 50mm | 1400mm | 1.4m x 15m |
*BK = Black. Replace with "SG" for Slate Grey and "CR" for Cream.
Standard colour is black. MOQ applies for other colours.
"A" = self-adhesive; delete if not required.
For example:
Megasorber F25BKA = 25mm thick, black film facing and self-adhesive backing.
Megasorber F25BK = 25mm thick with black film facing without self-adhesive backing
IMPORTANT NOTICE AND DISCLAIMER
Specifications are subject to change without notice. Please contact us for the latest version. "Fireproof", "Non-flammable", "Non-combustible" means the product has successfully passed AS/NZS 3837, IS0 5660-1, ASTM E1354 Group 1 fire rating (AWTA test report No. 7-566397-CV). Patent applied for Soundmesh G8. The data listed in this data sheet are typical or average values based on tests conducted by independent laboratories or by the manufacturer. They are indicative only of the results obtained in such tests and should not be considered as guaranteed maximums or minimums. Materials and installation methods must be tested under actual service to determine their suitability for a particular purpose.
Related Products
Megasorber FV—
acoustic foam with perforated vinyl facing
Megasorber P
Sound-absorbing polyester-wool with Soundmesh® G8 facing and optional self-adhesive backing